How to improve mold quality during injection mold processing
Injection mold manufacturing is a very complex process. From the initial design, processing, assembly, debugging and other steps to the final actual use, the impact of each process on the quality of the injection mold must be considered during the entire life cycle. Every detail must be in place to improve the quality of the final injection mold.
1. Select the casting material. The quality of the material directly affects the quality of the injection mold. It is very important to choose materials with good performance and good heat resistance. In this way, the products produced are the best.
2. The design of injection molds must be scientific and reasonable. For technical researchers, if they want to design products that meet the current market demand, they must design reasonably, use the most standard mold structure, and complete the quality of mold parts. , Standard implementation of the usability and technical processability of the mold structure.
3. Perfect quenching process. For injection molds, the quenching process is indispensable. The quenching steps must be performed correctly. If there is an incorrect operation in one step, it will cause quality problems in the produced molds, causing the injection molds to fail. use or shorten the service life.
4. Mold assembly: Injection mold assembly is just like assembling a machine. Every component and every screw must not be wrong, otherwise the consequences will be serious, ranging from product defects and affecting production to complete damage to the mold and scrapping. Therefore, the assembly work must be very meticulous. During the assembly process, special attention should be paid to the cleaning of the mold, especially the water channels and screw holes, and the iron filings inside must be blown away.
5. Mold maintenance: Mold maintenance mainly refers to the maintenance and upkeep during the production process. Comprehensive maintenance must be carried out after each use of the mold, especially the rust prevention of the molding part and the rust prevention of the main moving parts. Because the mold needs to receive water during the production process, sleep may get on the mold during installation or disassembly, so be sure to keep the mold dry and then apply a layer of oil to protect it.
